DirtRider
Contributor
I need some help figuring out how to route hoses and use both my AL80s with K valve (yoke) and my new hp 120 with an H valve. I dive with in a wetsuit.
I'd like to keep at least one a yoke for travel purposes
I'd like to minimize any changes needed requiring tools when switching back and forth
I could buy other equipment if necessary (i.e. right hand valve better?) but don't want to buy another reg.
Eventually I'll get into doubles so if that affects this decision let me know how.
This is what I was using:
Mares mr-22/abyss with yoke (reg on right side)
Suunto AI transmitter attached to first stage for vytec computer (left side on first)
Backup spg - suunto 3 gauge console converted to 2 guage back to back with spg on one side and sk7 compass on other (right side)
Low pressure inflator hose with sherwood shadow octo+ attached (left side)
I have this equipment available
Left hand Thermo H valve (careful here...thermo's left is others right) and the left hand post is the 300 bar din only and the center is the 232 bar din which allows a yoke insert.
New mares abyss/mr-22 setup with a din conversion (just converted from yoke)
Pics of the current mess without changing anything. This is just attaching the gear I have with the center mounted first stage the same way I used it diving without the H valve.
I'd like to keep at least one a yoke for travel purposes
I'd like to minimize any changes needed requiring tools when switching back and forth
I could buy other equipment if necessary (i.e. right hand valve better?) but don't want to buy another reg.
Eventually I'll get into doubles so if that affects this decision let me know how.
This is what I was using:
Mares mr-22/abyss with yoke (reg on right side)
Suunto AI transmitter attached to first stage for vytec computer (left side on first)
Backup spg - suunto 3 gauge console converted to 2 guage back to back with spg on one side and sk7 compass on other (right side)
Low pressure inflator hose with sherwood shadow octo+ attached (left side)
I have this equipment available
Left hand Thermo H valve (careful here...thermo's left is others right) and the left hand post is the 300 bar din only and the center is the 232 bar din which allows a yoke insert.
New mares abyss/mr-22 setup with a din conversion (just converted from yoke)
Pics of the current mess without changing anything. This is just attaching the gear I have with the center mounted first stage the same way I used it diving without the H valve.