hose routing a/lung legend doubles setup

[blazer]

recently bought 2 legends to use for my doubles. not quite as happy with the hose config as i was with my mk 25's, any suggestions?

 

[RJP]

recently bought 2 legends to use for my doubles. not quite as happy with the hose config as i was with my mk 25's, any suggestions?

What exactly is it that you're not comfortable with? I've no problems with mine. Do you have them mounted "upside down"? It's the first thing I noticed my LDS did when I got mine is removed the second stage hose and flipped 'em over?

Guess that doesn't really effect the routing, but on a single tank I do prefer not having the reg stick up.

 

[Tamas]

Your legends and my ATX200 are almost identical and the routing is not bad with them on doubles.

Try this and see how you like it:

 

[blazer]

yes i turned them over also for a lower profile, it just seems that the ports are much closer together and the hoses are crashing into the isolation valve

 

[Diver0001]

What size are your tanks?

 

[Dive-aholic]

Look at Tamas' photos. If you turn the reg so the "bottom" is turned in, then route the hoses on the ports facing down, you won't have hoses going anywhere near the isolation valve. I have Legends on my doubles and route them that way with no problems.

 

[blazer]

thanks, that looks like the perfect solution, duh,i should have tried that, now i hope they breath as nice as i'm told they do.

 

[Dive-aholic]

They breathe for you...