Hi, I'm in the early stages of planning some video light using this:
50W 5000lm 6500K Integrated Square 1-LED White Light Module (32-34V) - Free Shipping - DealExtreme
It comes at 11USD incl shipment.
My early plans include a stainless steel or nautical aluminum back plate, the element glued to it, a plastic ring, acrylic front plate, MOSFET and hall for power on/off and a filled cavity/no trapped air/no service. No lens.
Eventually a constant current regulator in there.
The trouble starts when I get to getting power in there/glass feed-through/connector and battery pack.
I know lemo connectors, but do you have any good/cheap tips for getting the power in there?
Any good rediculously cheap ready-made under-water battery packs?
Thanks in advance for your suggestions!
50W 5000lm 6500K Integrated Square 1-LED White Light Module (32-34V) - Free Shipping - DealExtreme
It comes at 11USD incl shipment.
My early plans include a stainless steel or nautical aluminum back plate, the element glued to it, a plastic ring, acrylic front plate, MOSFET and hall for power on/off and a filled cavity/no trapped air/no service. No lens.
Eventually a constant current regulator in there.
The trouble starts when I get to getting power in there/glass feed-through/connector and battery pack.
I know lemo connectors, but do you have any good/cheap tips for getting the power in there?
Any good rediculously cheap ready-made under-water battery packs?
Thanks in advance for your suggestions!
