• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Help with malfunctioning Sealife SL960D strobe light

Discussion in 'SeaLife' started by asterosdeals, Jul 29, 2020.

  1. asterosdeals

    asterosdeals Registered

    # of Dives: 100 - 199
    Location: california
    27
    3
    Hi all, i have an old (underwater) strobe light (Sealife SL960D, like this one: SeaLife SL960D Digital Pro Flash Working Condition | eBay).

    Flash fires when I set it in test mode, however, when I am trying to trigger it with a camera internal flash, it does not respond to it.

    I did some troubleshooting. The photo sensors are responding to light. So when no light, it reads 11V, and with intense light it goes to almost 0V. It does not seem to work with resistance, so in other words, no matter light or not, it reads infinite resistance.

    Can someone help and share if he/she has seen anything similar? thx
     

Share This Page