fs a couple old tanks

[redneck23ms]

i picked them up with some other gear and i don't really need them.
.make an offer if interested. located in fort collins co
1st tank is an old steel tank. it measures roughly 25" tall to the top of the neck by roughly 6.75" wide
this is what is stamped on it. VOIT 100-3AA2250 HJ 32227
first hydro was 8-65 and last was 8-94


second is an old twin pony bottle set. each tank measures roughly 14.5"x3" and has a US Divers valve/manifold
this is stanmped on the neck WR 100-3AA2320 HI 10356 USDon one WL 100-3AA2320 HI 10418 USD on the other.
first hydros 7-63 and last 8-94

 

[herman]

FYI that is not "100- 3AA..." but ICC -3AA. ICC was the interstate commerce commision which was replaced by DOT.

I can't tell from the photos but does the orange tank have an oring valve or a tapered one? If it's an oring, then you have a good steel 72, get it hydroed, put a new valve in it and use it.

 

[redneck23ms]

looks to be tapered as i can see threads above the neck and thanks for the info. some of the letters were tough to read

 

[Diverdon]

I've never seen ponies like ha and hey are interesting to me. How are those ponies supported, just the valve? I that sturdy, or should they be banded? And are they pressurized?

Thank you,

Don

 

[redneck23ms]

only supported by the valve. its pretty sturdy. they have a little air in them but not much

 

[dead dog]

These are for fire fighters, they are Survivair tanks, see eBay : Survivair Double SCBA Tank w Mask Regulator and Backpack 45600 | eBay

 

[redneck23ms]

sold.