SeaJay
Contributor
leadweight once bubbled...
I am not alone in saying that the BP & Wings is a poor choice for the casual diver who takes one or two warm water trips per year. That diver could spend an entire vacation sorting out the BP. He might not ever get it right.
I must admit that there is truth to that. Getting it adjusted "in the ballpark" takes about ten minutes. Getting it "spot on" could take many dives.
For this reason, BC's with padding and user-adjustable straps have the advantage. With the user-adjustable straps, it can be adjusted right on the diver while he's wearing it, making for a rig that's more likely to fit. Also, with all of that padding, likely the diver can't tell the difference between a well-fitting rig and a poor fitting rig. Thus, "winging it" works fine, and he doesn't spend the majority of his dives adjusting.
I wonder how many of these "twice a year" divers would convert to being 100 times a year divers if they were shown a simpler, cleaner way of diving?
How about divers who use really minimal exposure suits, like .5 mil, skins or nothing? Love those stiff shoulder straps.
That's a myth. A 2" strap with a pad behind it still exerts the same amount of pressure as a 2" strap without padding behind it. (Which, by the way, in the water should be near zero pounds.) It might make a difference if the straps were made of hard plastic or metal or something, in that the pad would reduce pressure points. However, we're talking about a STRAP here... Thre are no pressure points, unless you've got a rock under your strap... Which can be fixed my removing the rock, not by adding padding.
I think I'm going to begin manufacturing a harness similar to the OMS or Dive-Rite "deluxe" harnesses that allow adjustment "on the fly." This would be a perfect item to help people transition from a back-inflate or jacket to a bp/wing. It would also allow people to get a quick "tryout" or "test drive" of a correctly adjusted bp/wing setup. It would also allow dive shops all over the place to rent them with ease, and allow people to try out a bp/wing.
However, I've found that once I've adjusted everything perfectly and am happy with the adjustment, I am only annoyed by the adjusters which end up allowing my adjustments to be lost. They're also the most fragile part of the rig.
Thus, I've found that a continuous loop is my personal favorite. Simple, rugged, cheap, streamlined, and it never loses an adjustment. However, it is a pain to get it perfect. That's why it works so well for someone who buys their own BC, but doesn't work well for someone who rents.
I think a "quick adjust" harness would help people transition...
It never fails to amaze me that every diver who buys a BP feels compelled to convert everyone else to their way of doing things. It must be the feeling of pride that comes from getting through adjusting the darn thing.
Well, dude, it's a consistent pattern for a reason. The reason isn't because we're finally thrilled that we got the adjustment right... It's because the things are so damn good. It's because it changes everything... And we can't help but to want to tell everyone.