Fit on Diva

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

cougar

Contributor
Messages
187
Reaction score
6
Location
northern New Mexico
# of dives
500 - 999
I will be either be ordering my replacement BCD on line or having my husband pick it up in Hong Kong. I have some questions about the fit on the Diva LX. I had a large...it fit....but it semed that if I lost ten pounds there was no room left to snug it up. It was already at the snuggest setting. So...I'm thinking an M/L....but I recal trying one of those in the shop and the cumerbund didn't fasten. Is there an adjustment behind to enlarge the cumerbund??? I hate to order a L and continue shrinking so it floats loose...on the other hand...I don't want to find out I can't use a M/L now. How much adjustment is there to the cumerbund?..(I had never tried to adjust mine before it was stolen)
 
I am not sure in reading your question if you had found your adjustment on the back area of the cumberbund on your large or if you just wore it at the setting it came at. I found that mine, when I got it out of the box was set at the middle setting on the adjustable cumberbund. If that is the case with yours you have some 2-3 inches you could tighten or loosen it. If your Large was set at the tightest setting and you are losing weight you might want to try the M/L. If I were you I would try to find a LDS that carries the Diva LX and at least try it on before you buy it, at the very least look at the sizing chart on their website and compare the Large you had with the measurements of the M/L.

If you hadn't found the adjustments they are behind the soft back panel. I knew they were somewhere in the back area, but I still had to look hard for them. (Maybe I was just dumb, after all it was my first non-rental BC.) I still wouldn't trade it for anything I've seen so far.

emeyer36
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom