Fill whip hose

[Candiru]

I have a cheap fill whip that I want to change the hose on. It looks like the fill whip sold by DGX, leisure pro, etc. I was wanting to replace it with a shorter miflex hp type hose. Any ideas on what the fittings on the end of the hose would be and ideas for sourcing the hose?

 

[macado]

Usually 1/4" NPT. I use the hoses from McMasterCarr

McMaster-Carr

This says it's rated for 3000psi but the burst pressure is much higher. I have no problem running 4000psi through these.

 

[Kirk king]

I have a cheap fill whip that I want to change the hose on. It looks like the fill whip sold by DGX, leisure pro, etc. I was wanting to replace it with a shorter miflex hp type hose. Any ideas on what the fittings on the end of the hose would be and ideas for sourcing the hose?

i get my hoses from parker hose shop here all fittings are 1/4 NPT and i use there teflon lined stainless steel braid hoses.... very cheep and very reliable.. and spend the extra few bucks a get a swivel fitting on the end..