EPL1: anyone with WA UWL-100 Inon tipe 1 or 2 wet lens with kit lens set at 14mm

[nudibranco]

I would think it may not work at all but I do wonder if it would work...

The PT-EP01 case standard port is basically attached to the front of the 14-42 kit lens so it may work...or not?

 

[PHIL RUDIN]

The mirrorless cameras lenses are much more like a DSLR lens than a consumer comtact camera lens and as a result the wide angle adapters designed to mount on the outside of the housing DO NOT work well. The 67 mm close-up lenses and mounts designed to fit housings like the PT-EP01 DO work very well.

Phil Rudin

 

[PeeBee UK]

Perfect timing, I was going to ask a related question and suspect that you are the right person to answer it Phil. I have two of the inon stackable wet close up lenses which I currently use on my G9/Ike setup, I know I can get the adapter for the Oly housing, which I am just about to order, that will take these lenses but was interested to know if anyone has used more than one of these lenses at the same time (stacked) and what the results were like?

 

[PHIL RUDIN]

The Inon UCL-165M67 close-up lenses can be stacked without a problem. You need to remember that the greater the magnifaction the greater the difficulty you will have with getting sharp focus.

Image with two Inon UCL-165M67 close-up lenses, shown full frame.

Phil Rudin

 

[nudibranco]

excellent!! thanks!

 

[PeeBee UK]

The Inon UCL-165M67 close-up lenses can be stacked without a problem. You need to remember that the greater the magnifaction the greater the difficulty you will have with getting sharp focus.

Image with two Inon UCL-165M67 close-up lenses, shown full frame.

Phil Rudin

Cheers Phil, I already stack them on my G9 and couldn't think of a reason why they wouldn't stack on the Oly but thought I'd check