divergal65
Contributor
We got a Panasonic Lumix TS2 (without the case)and took it on a recent trip to Bonaire, and really liked the results. It really is waterproof to 33 ft. or less - we were concerned but its under warranty so why not try it. But its obvious that lighting is going to be a problem because the built in flash didn't work very well at all at depths ~ 30 ft.We were shooting some macro but also had some diver portraits (I was the model) and when hubby was greater than about 5 feet away from me, the colors were primarily just shades of blue and my skin tone looked almost green ... yuck!
So we need to get some more lighting. But, what do we get and how do we set it up?
Obviously we need the housing to take it deeper than 33 ft. and saw some on Amazon for ~ 250.00, but we also need a strobe - and would like to attach it to the camera housing - but how
I told you it was embarassing:blinking:
Also, is it possible to get a strobe that is detachable from the housing, so it's activated by the cameras flash - some kind of wireless connection?
I'm pretty new to SB so maybe this has been mentioned before. I've looked on other forums but haven't had the time to be thorough - job/kids/life keep getting in the way.
So we need to get some more lighting. But, what do we get and how do we set it up?
Obviously we need the housing to take it deeper than 33 ft. and saw some on Amazon for ~ 250.00, but we also need a strobe - and would like to attach it to the camera housing - but how
I told you it was embarassing:blinking:
Also, is it possible to get a strobe that is detachable from the housing, so it's activated by the cameras flash - some kind of wireless connection?
I'm pretty new to SB so maybe this has been mentioned before. I've looked on other forums but haven't had the time to be thorough - job/kids/life keep getting in the way.