Dry-glove options

[mullannix930]

I have an Aqualung Fusion with the oval wrist seal system. What options are compatible with this system? I know people have had problems with the Antares, so that is probably out.

I am prob going with the EZ-on glove for a while but I would like other options, without changing out the oval wrist rings. I have heard the ultima has had problems with larger suits (I’m a 3xl suit guy).

 

[formernuke]

Roloc 90 would be my choice

 

[wetb4igetinthewater]

I have the Rolock 90. I like it more than the SiTech that I had in the past. I don't have a lot of dives on it. No experience with Kubi, another popular choice.

 

[mullannix930]

Will they fit on the oval rings that come on the fusion Drysuit?

 

[formernuke]

The 90 is designed for it.

 

[Marie13]

Waterproof Ultima is another that will fit the Fusion ovals.

 

[lexvil]

Waterproof ultima (have on one suit) waterproof ellipse (tried and would rather dive naked in shark infested waters with blood poured over me than ever try again) and Rolock 90, the best in my opinion is the RoLock as it is the easiest to mount gloves to the rings, easiest to adjust glove length and the easiest by far to don and doff!

 

[cleung]

I just got the Rolock 90 installed and finding it pretty tough to don and doff the gloves part as it's pretty tight, even with silicone grease applied to both the gloves and sleave sections. There's no way I can get them on and off on my own without a buddy. Does this get easier over time, ie., the sections move easier?

 

[lexvil]

I just got the Rolock 90 installed and finding it pretty tough to don and doff the gloves part as it's pretty tight, even with silicone grease applied to both the gloves and sleave sections. There's no way I can get them on and off on my own without a buddy. Does this get easier over time, ie., the sections move easier?

Slide your hand back into the ring, make a fist and twist.

 

[loosenit2]

I just got the Rolock 90 installed and finding it pretty tough to don and doff the gloves part as it's pretty tight, even with silicone grease applied to both the gloves and sleave sections. There's no way I can get them on and off on my own without a buddy. Does this get easier over time, ie., the sections move easier?

I just put on a rolock 3 ring system on my dui this weekend. It was very stilf at first. 1 make sure you have fully seated and pressed in the o rings between the suit side ring and the glove side ring, that made it a ton easier. 2 good amount of silicone grease, 3 sit on the couch and just lock them in a few dozen times and it is very easy to lock in now.