- Messages
- 22,171
- Reaction score
- 2,798
- # of dives
- 5000 - ∞
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
...the same way you'd use conventional tables for multiple dives?
<shrugs>
If you are asking specifically about the Ascent to Altitude tables, you use the highest Repetitive Group (in the last 24 hours) for computation of your SI until moving to the higher altitude.
All the best, James
Diving at and ascending to altitude is not quite the same thing. Doing altitude diving I hope youre aware of that..The lake we routinely dive here is at 5250 ft. I wouldn't be concerned with gaining 600-800 feet elevation.
Some newer computers do. I think Harris' piece predates.Good article. Now I just need to determine if my computers take altitude into consideration when calculating depth because me thinks they do!![]()
Some of the responses to this question trouble me somewhat. I crossed the street 3 times against a red light and didn't get hit so you should be able to as well.........
This is just my personal opinion.
Dive Safe.
Steve
The science is far more than just theory, there’s a large group at Brooks Air Force Base that’s worked on this for years, in fact the originator of DAN, Col. Jeff Davis, M.D. was there and lots of empirical testing was done.I like the analogy, but I don't think it fits. The science behind altitude adjustments is largely theory. My computer does penalize me for altitude, and I dive within those constraints. I'm also very aware of some of the fly time adjustments.
I suspect that the techies are managing only because of the mix that they’re diving and the oxygen their decompressing with. Clearly the other divers are likely not loading up on nitrogen very heavily and the time it takes them to the top of the pass is sufficient for them to out gas.OTOH, every time we are at the Hole, there is generally well over 100 divers. Every one of them living in CO will hit over 8000 feet on the way home after a weekend of diving. None of them will off gas for more than a few hours before doing so.
To date I've not heard of ONE person getting bent doing this. If they want a test group, here it is. As I indicated, the Tech divers often hit over 200' on two dives, do NOT adjust for altitude in their deco scenarios, and they then drive home over an 8000' pass.
Getting bent going quickly from a day of heavy duty diving at Catalina then driving past the airport at 1,602 ft. can, in rare cases, get you bent (there is a similar rise at Pacheco Pass, 1,300 ft., from Santa Cruz to Los Gatos) and it is only a drop in absolute pressure of about 5%. Going from 5,280 feet to 8,950 is on the order of 15% and thus should present a more serious challenge. When diving in Monterey we were required to do the ascend to altitude calculation for 2,000 feet if we were driving back over Pacheco Pass.I would LOVE it if DAN, or some other agency wanted to do some studies on divers who dive at altitude on a regular basis rather than just working off theory.
As for the OP's question, I do shallow profiles in CO lakes (5280'), and then head home to 8950' a few hours later. I'm not even sure gaining 600' of altitude is something to consider.
Dr. Bill sited an example of someone getting bent by adding a 1600' altitude gain. The real question would be WHY did she get bent? There is a lot that goes into this mix, and a gain of 1600' may have had nothing to do with it.
The science is far more than just theory, theres a large group at Brooks Air Force Base thats worked on this for years, in fact the originator of DAN, Col. Jeff Davis, M.D. was there and lots of empirical testing was done.
Any links to this type of information?