Dolphin and 2 gases

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Dingo

Guest
Messages
4
Reaction score
0
Location
Denmark
Have anybody got experience with rebuilding the dolphin to accommodate 2 gases, i.e. bottom gas + 100% for deco.

Any ideas of how to get the best setup will be of interest
 
Hi Dingo,

I use two gases with my homebuild RB. It's not a Dolphin but it includes much Dolphin parts.
Just have a look at.

Abyzz
 
I have dolphin in the stock forum so to speak, i changed the bottle to a 65 steel with h valve one for re breather reg and other for oc 1st stage bail out.
i carry a 40 cf al and what i do is have it set up for oc alos, but i run a hp line with a quick disconnect,from the high pressure port of the frist stage on deco bottle to the hp port of the dreager first stage.
when it is time to go to the al 40 (which i have 80 percent in)
i reach over shut the valve going to the 65 off and then turn on the 40 valve.
hope this explains for you
never have to remove mouth piece and it makes that 40 bottle into a 2+hour deco bottle if needed!!!
 

Back
Top Bottom