DIY Buoyancy Compensators / Wing / Air Cell

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Sure will
Right! off to the lake to dive my doubles dry!
R
 
Diver Rite direct sell the bladders for 70 bucks or so... just sew up a pocket out of ballistic fabric to put it in....

Not worth it if you consider the effort.. but if you're in it for the fun of DIY then go for it....

You could also use a car innertube, make mechanical bolt clamps to seal the ends tight, or use brake hose clamps, and use vulcanised rubber or mechanical fittings to make the couplings...

Everything is possible.... doesn't mean it will work, or won't...

Could you explain the use of mechanical fittings?
Is this how you would construct this bc:
 

Attachments

  • Silly BC diagram.PNG
    Silly BC diagram.PNG
    91.1 KB · Views: 175
i took apart my Halcyon eclipse wing. Heck a little Yank ingenuity and the right materials and you could make one just as good. I want to revers engineer a trans pac harness
 
I think trying to save money by manufacturing one's own wing would be a foolhardy venture at best, and at worst, fatal.

Just my opinion.

the K

I don't know about fatal.
You make it sound so extreme.
It's only a makeshift BC.
You have to remember....BC's weren't even invented until 30 or so years ago.
Until then, we used our lungs as BCD's
 
DIY's are great for folks up north who have all winter to work on this stuff.
 

Back
Top Bottom