Diving with altitude of more than 300M

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

namabiru:
Question. I know you have to have a different set of tables. Can you get them at the LDS, or order them easily?

You can usually get a separate table in slate form at your LDS. If you get the Adventures in Diving book (PADI), it is within it, in the Altitude diving section. I assume all other agencies must have it in their equivalent training materials.
 
I dive at Lake Tahoe,which is at an elevation of 6,230 feet. If I am going to do multiple dives that day I consult the "altitude adjustment table" and we round up to a 7,000 foot dive and that in turn increases your depth as shown be the messages prior to this one. The tricky part is (and I haven't taken the altitude course) that the drive from Reno to Tahoe takes me over a pass that sits at 8,900 feet at its highest point and I pass it again on my way home. I have been told that I also have to take this into consideration which is a difference of 2,670 each way. I'm not sure how I calculate this into the plan so if anyone knows-chime on in. Most people I dive with do not include this extra calculation, and as far as I know we haven't been hurt yet.
 
Coldiver1:
I dive at Lake Tahoe,which is at an elevation of 6,230 feet. If I am going to do multiple dives that day I consult the "altitude adjustment table" and we round up to a 7,000 foot dive and that in turn increases your depth as shown be the messages prior to this one. The tricky part is (and I haven't taken the altitude course) that the drive from Reno to Tahoe takes me over a pass that sits at 8,900 feet at its highest point and I pass it again on my way home. I have been told that I also have to take this into consideration which is a difference of 2,670 each way. I'm not sure how I calculate this into the plan so if anyone knows-chime on in. Most people I dive with do not include this extra calculation, and as far as I know we haven't been hurt yet.

You treat it as a flying after diving scenario.

Flying after diving is based on an increase in altitude of 2,000 feet or more. This qualifies, so it is the same as stepping on a plane.
 
Coldiver1:
I'm not sure how I calculate this into the plan so if anyone knows-chime on in.
Treating it as flying after diving can be a bit restrictive. A couple of other methods are discussed in this thread:
http://www.scubaboard.com/showthread.php?t=86431

Of the methods mentioned, I no longer like the technique of treating all your dives as if you’re at your maximum altitude. The problem is that you’re then essentially doing a very shallow “dive” of many hours duration.
 

Back
Top Bottom