Dive Rite and OMS shoulder pull dump valves

[Mandy3206]

I'm wondering if the Dive Rite shoulder pull dump valve screw into a OMS bladder, the reason is that a friend from the US is selling me the shoulder pull dump valve at a great price 'cause he's switching to an elbow. That way I won't have to spend a fortune on the original OMS

I tried my old cressi shoulder pull dump valve into my OMS bladder but it won't fit correctly, will crossthread and ruin the bladder. Maybe this is due to european fabrication vs US fabrication, not sure.

Does anyone know if DR and OMS are compatible in the bladder threads?

I know pros and cons about elbows and pull dump valves and decided to go with the pull dump valve so please don't tell me to use the elbow.

Thanks in advance to any responses.

PS: A friend of his is offering to buy the valve, but he'll be holding it for me for a few days to give me some time to find out if it fits.

Thank you
Mandy

 

[Hyper-limits]

Does anyone know if DR and OMS are compatible in the bladder threads?

Mandy

Yes, they are have the same threads.

 

[TMurrr]

Yes, they are have the same threads.

Anyone know if DGX is also the same threads?

 

[Endler's]

Put similar question, to Dive Gear Express last month. Their reply:

Based upon this, the answer to @Mandy3206's question would be no, you need OMS branded remote exhaust elbow. For @TMurrr, the Dive Rite fits DGX wing.

 

[happy-diver]

The current stuff is not interchangeable however not the current stuff is interchangeable

 

[Centrals]

The old OMS twin bladder wing is compatible with DR.
I have no idea on the latest model.
However, I had bought a single OMS wing(27lbs) from DGX several yrs and had to buy a OMS plain elbow to replace the pull dump.
@Mandy3206
You can have the pull dump for free but I have no idea how to ship it. Muy lejos de HK, que lastima.