DIN Fitting advice

[hifrmHI]

Hello, first off I'm using this compressor to fill tanks for airgunning. It's a Bauer JR11 and this is the fitting it came with. Is this a standard 300 DIN fitting ? I filled my carbon fiber tank with it and it worked here's a pic of the tanks valve. Now, here's the tricky part for me. I want to fill a tank with a Kvalve without changing the compressor part of it. I bought a DIN to kvalve adapter but when it came in it was for a 200 bar setup. Any ideas guys ? TIA

 

[Graeme Tolton]

300 bar will screw into and work with a 200 bar adapter.

The reason for having 2 lengths of thread is to prevent one from installing a 200 bar regulator into a 300 bar valve.