Dive Doctor
Registered
Anyone know the thread dimensions for the DIN 200 and 300 standards?
I measure it at 14 pitch, but it seems larger diameter than the NF 7/8" thread. I'd expect it to be metric, but it is close, but not exactly 1.75 mm pitch. Perhaps it's _very_ non-standard?
Thanks,
Joe
I measure it at 14 pitch, but it seems larger diameter than the NF 7/8" thread. I'd expect it to be metric, but it is close, but not exactly 1.75 mm pitch. Perhaps it's _very_ non-standard?
Thanks,
Joe