rcontrera
Contributor
That is most likely micro hose. That is what I use for out gauge panel as well. I buy them already made up since I don't sell enough of them to justify investing in the machinery to custom build them.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
It actually looks to me like a standard air brake fitting and tube..... Which has a burst pressure of around 1,000 PSI
Just want to confirm that the threads into the compressor separators and and fittings are in fact 1/8" NPT and not BSPT. As far as I can measure with a thread pitch gauge, it is 27 TPI (which is NPT)
Does anybody know the way to determine a date for a K14?
Hi the thread you are looking for is 1/8 bsp also known as 1/8G.
The thread in the housings is a parallel thread.
Some time bauer use a straight fitting to 6mm pipe. known as a light L fitting
other if they use a elbow 90deg fitting they use a BSPT.
Hope this helps you.
PM me if you get stuck