D420 adapter for normal hose?

[rsingler]

Since you're using a D420, one more small point. We'll see if @lexvil concurs, but if you decide to use an angled connector, it needs to be a 110-120° version rather than 90°.

The width of the exhaust tee will restrict hose motion a little bit with a 90° connection. Like @lexvil , I'm coming from the left with my bailout bottle, but the principle is the same from the right with open circuit.

 

[lexvil]

Since you're using a D420, one more small point. We'll see if @lexvil concurs, but if you decide to use an angled connector, it needs to be a 110-120° version rather than 90°.
View attachment 628644
The width of the exhaust tee will restrict hose motion a little bit with a 90° connection. Like @lexvil , I'm coming from the left with my bailout bottle, but the principle is the same from the right with open circuit.

Yes, a 90° will hang up, I use an Omni on my primary D420, I know I’m gonna die but moving back to Jet Fins should bath me in so much good juju that the Omni should be safe.

 

[rsingler]

the Omni should be safe

As long as it's Version 2!
Otherwise, ur gonna die!

 

[lexvil]

As long as it's Version 2!
Otherwise, ur gonna die!

Version 1, hence the Jets