Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Fair enough, thanks. I understand that's the best/ideal way to go, and is certainly my goal, I've just found it difficult to put into practice when I'm on vacation.
So I guess my question on the reel thing is what sort of training should accompany it? It seems simple enough, but then I read something in one post warning against hooking it directly to your BCD. OK, makes sense so a stuck reel doesn't cause an uncontrolled ascent, but that made me wonder what else I don't know about them that could be dangerous.
1- NOTHING at all wrong with an AirII. I used a Zeagle integrated SS1 for years without a single issue, and it's still part of one of my BC's.
2- I'm sure this'll get a few comments: if you're cramping, you might want to try split fins. Apollo Bios or Atomics...
So I guess my question on the reel thing is what sort of training should accompany it? It seems simple enough, but then I read something in one post warning against hooking it directly to your BCD. OK, makes sense so a stuck reel doesn't cause an uncontrolled ascent, but that made me wonder what else I don't know about them that could be dangerous.
-Sean
Sean, you might want to take a look at this finger spool:
General Purpose Safety Reel - Small - Product Detail
It's a finger spool that works like a reel... couldn't be easier, and best spool I've ever owned (complete with drag knob, so you needn't worry about clipping it to your BCD and having your SMB carry you off into an impending chamber ride).
That same site has a few videos showing you its deployment for different purposes...
Without wanting to go off-topic, I will simply advise the OP against that more complicated, more error prone type of reel.
I've only been in one OOA situation, in which I had to deploy the SS1. In that case, I had a panicked diver (not my buddy), come around from behind me, and tear my primary out of my mouth (which would have happened, with the integrated, or a standard octo). In that instance, the SS1 did what it was supposed to do, and the two of us made a normal controlled ascent, complete with safety stop. Other than that, I'd never had a malfunction, free-flow, sticking inflate or deflate buttons, freeze-up, or any other unfortunate circumstance with the integrated. More than I can say for a couple of standard inflators out there (including Halcyon).Just a question... was the lack of issues attributed to the effectiveness of the AirII or a lack of incidents in which you needed to use it?
Well, I happen to agree. I've never been able to do decent frog kicks in splits. And the only time I've ever needed to back-kick was in a tight reef overhang taking a couple of pictures... However, that's the exception. I believe I mentioned that splits are primarily for recreational diving. As to whether they're better for cramping, I've *personally* found that to be the case -- and that's about as far as I'm diving into *that* particular can of worms, in this thread...I think that any high-end, well designed fin will ease the issue of cramps. Split Fins are fine for recreational open-water divers. The main issue stems from whether they have enough power to propel a fully equipped technical diver, especially against oncoming current/water flow. Some users also report that they offer less control when attempting back-kicks or helicopter turns. They are really only issues that affect advanced level divers.
Without wanting to go off-topic, I will simply advise the OP against that more complicated, more error prone type of reel.
Have you practiced dumping, pulling on hose (s) with the AirII
in your mouth.