conshelf 21 intermediate pressure ?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

idive2

Contributor
Messages
978
Reaction score
138
Location
Palm Beach County
# of dives
500 - 999
I've located online pdf files for the conshelf XI and the Conshelf XIV but unable to find
anything on the Conshelf 21. It looks very close to the XIV and was wondering if the
IP pressures are similar. The IP pressures in the conshelf line seem to run from 110 psi
shown for the Conshelf XI as high as 140 psi shown for the conshelf XIV. As long as the second
stage is adjusted after the first stage just wondering if plus or minus 10 psi or so from the
first stage is of any concern. I will be using a conshelf 21 first stage with a conshelf XI second stage.
I'm seeing 120-140 psi as a general intermediate pressure range on most regulators.
 
I set everything I have at 135, makes swapping around stages less of an issue and I don't have to keep up with what reg was set to what.
 
I was diving the XXI with matching seconds. You are fine.


Sent from my iPad using Tapatalk
 
All my Connies are set at 140 psi.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom