Can Nauticam NA-EM5 Housing be Retrofited w/ Nauticam Vaccum Leak Test Electronics?

[BoltSnap]

What was the cost for the supply and installation of the vacuum leak test system in the US?

 

[Hennyb]

Actually had it done in Thailand but about sane price as US 220 USD plus another 200 for valve and pump. Can verify on Nauticam website.

Sent from my GT-I9500 using Tapatalk

 

[BoltSnap]

Can one switch between the hand pump and the BC pump easily or are they totally different setups?

 

[Hennyb]

Different setup, for the EM5 don't recommend BC valve. Hand pump is small and takes less than 10 seconds to reach vacuum threshold

Sent from my GT-I9500 using Tapatalk

 

[Akimbo]

Then venturi vacuum system uses a Schrader valve that is common to many BCs and is intended for large housings that would take a long time to pump down by hand. As a result, the cap is much taller to cover the valve. Example:

Nauticam M16 Dual Activation Vacuum Valve Compatible with QD Adapter [nau.25613] - $320.00 : Reef Photo & Video!, The Underwater Photo Pros

Nauticam M16 Vacuum Valve [nau.25612] - $220.00 : Reef Photo & Video!, The Underwater Photo Pros

Nauticam Vacuum Valves

Here is the form and prices for the sensor installation in the US:

http://reefphoto.com/forms/nauticam...il&utm_term=0_10680d01a0-7cc4982883-293933777

 

[BoltSnap]

Then venturi vacuum system uses a Schrader valve that is common to many BCs and is intended for large housings that would take a long time to pump down by hand. As a result, the cap is much taller to cover the valve. Example:

Nauticam M16 Dual Activation Vacuum Valve Compatible with QD Adapter [nau.25613] - $320.00 : Reef Photo & Video!, The Underwater Photo Pros

Nauticam M16 Vacuum Valve [nau.25612] - $220.00 : Reef Photo & Video!, The Underwater Photo Pros

Nauticam Vacuum Valves

Here is the form and prices for the sensor installation in the US:

http://reefphoto.com/forms/nauticam...il&utm_term=0_10680d01a0-7cc4982883-293933777

Akimbo,

I am rather confused now. Can one use the BC quick connect and the hand pump on the same connection for EM5 system?

 

[Hennyb]

Cannot use them both. Really not necessary to use BC connect with EM5. Hand Pump is very quick

Sent from my GT-I9500 using Tapatalk