stiebs
Contributor
A few months down the track since getting my refurbed Oceanus. I've run up about 10hrs of operation, with the last 7 after a change from mineral to synth. So just about to do another oil change and a new filter as well.
Got the air tested, results as below.
Only standout negative is the moisture. Is this a level to worry about?
I was filling on a cold day (about 10ºC ambient - it's winter here) with some dew in the air. The cylinder I provided for analysis was an AL40 which I drained from 200bar down to empty before filling again. Was careful not to leave the valve open when it was empty.
Drained pretty much spot on every 15mins through filling 4x 10L steels to 230 bar and the 1x 40cf to 200 bar.
Got the air tested, results as below.
Only standout negative is the moisture. Is this a level to worry about?
I was filling on a cold day (about 10ºC ambient - it's winter here) with some dew in the air. The cylinder I provided for analysis was an AL40 which I drained from 200bar down to empty before filling again. Was careful not to leave the valve open when it was empty.
Drained pretty much spot on every 15mins through filling 4x 10L steels to 230 bar and the 1x 40cf to 200 bar.