Question Backup lights

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Apologies if that was just stating a bunch of stuff you already knew.
No not at all. I'm not very physics talented so it took me many efforts understanding the gas already, really not want to start again with light.

I'm aware of lumens, and lux, but never candela. Just wondering, is there a way to convert these for comparison if the manufacturer does not provide a consistent measurement?

Cheers,
Ale
 
No not at all. I'm not very physics talented so it took me many efforts understanding the gas already, really not want to start again with light.

I'm aware of lumens, and lux, but never candela. Just wondering, is there a way to convert these for comparison if the manufacturer does not provide a consistent measurement?

Cheers,
Ale

My bad on that. Lux and candela are very similar in concept (but not the same). I should have explained that earlier.

There is not really a direct conversion between them as they are all different.

Lumens is total output.

Lux is output per surface area. I.e. Lumens per square meter.

Candela is brightness from a certain distance. If a light source disappears from view when you get 1 foot away from it, then it is 1 Candle-foot in brightness.

Hopefully, this illustrates why Lux and Candela are similar in concept, but not exactly the same.

Evaluation of lights/torches is complex. Lumens output, beam angle, amount of spill (the less bright halo of light around the bright spot in the middle), and many other factors are at play.

I start with lumens and beam angle and go from there. Those two specs do not tell the whole story, but they usually tell the main plot.
 
My bad on that. Lux and candela are very similar in concept (but not the same). I should have explained that earlier.

There is not really a direct conversion between them as they are all different.
No worries, very helpful for me to start, thanks mate.
 
You can get 10 hours out of a DGX 1000-6 (also uses 1 x 21700) - on Low.

Almost 3 hours on 1/2 power (which is still brighter than most).

And all with constant output.

The TT Mini S3 with the 1400-30000-5 module claims 1400 lumens output, for 4 - 6 hours.

I don't actually believe it's possible for a 21700 battery to power 1400 lumens of output for 4 hours. Not with today's battery and LED emitter tech.

If it really does give useable light for 4 hours, my SPECULATION is that it is producing less than half that many lumens for most of that time.

I've owned that LED it's closer to 1000.
 

Back
Top Bottom