aikiguy
Contributor
- Messages
- 122
- Reaction score
- 1
- # of dives
- 50 - 99
[h=2]Aqualung / Us Divers high pressure block guide (PN 111000)[/h]
I have a lot of old Conshelfs.... They seem to be drawn to me, and there are a few I would like to rebuild in the next few weeks.
Having done this the armstrong method before, where you line everything up and then carefully push on it, all the while hoping that everything doesn't go awry, it is not the easiest way to do it.
I would like either the Aqualung tool (PN 111000), or if someone has one and a set of calipers handy a quick sketch of the Id and OD and length of the various machining of it so that I can make one out of some nice uhmwpe that I have laying around here. (Or aluminum if that would seem to to work better.)
Thanks,
Guy
Having done this the armstrong method before, where you line everything up and then carefully push on it, all the while hoping that everything doesn't go awry, it is not the easiest way to do it.
I would like either the Aqualung tool (PN 111000), or if someone has one and a set of calipers handy a quick sketch of the Id and OD and length of the various machining of it so that I can make one out of some nice uhmwpe that I have laying around here. (Or aluminum if that would seem to to work better.)
Thanks,
Guy
