Apeks WTX4 Bouyancy Cell

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

scubasteve321

Registered
Messages
15
Reaction score
0
Location
Orlando
# of dives
200 - 499
Decided to go for a singles only wing. My loss is your gain!

New, never in the water, just out of the box!!

199 shipped!

From the web site

This is a new buoyancy cell in the WTX Series of floatation products. The WTX4 is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too!

  • The WTX4 can mate directly to the WTX harness or the stainless steel back plate using twin tank bands or using center bolts.
  • Highly efficient drains allow water to empty quickly after a dive.
  • Outer bag constructed out of Armorshield™ Cordura® to resist abraision and fading.
  • Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests worn by US fighter pilots.
  • The airway comes off of the back top center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose.
  • Features the Apeks technical inflator with brass buttons.
  • Pull dump on inside lower left.
  • Optional pull dump may be added to the inside lower right.
  • The latest version of the WTX4 bladder has been made to accommodate our new Internal Retractor System which noticeably reduces its profile.
 

Attachments

  • apeks_wtx4.jpg
    apeks_wtx4.jpg
    12 KB · Views: 113

Back
Top Bottom