OP
RavenChief
Registered
Anyone have tips or techniques for removing/ replacing cylinder valves on large air storage cylinders? I need help so I can send these tanks in for hydro.
Question Anyone have tips or techniques for removing/ replacing cylinder valves on large air storage cylinders?
- Thread starter RavenChief
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
dead dog
Contributor
What was old is new again. Back in the 1950's we rolled the tank (any size) against a curb back up our car with the tires against the tank and remove the valve.
I would find a different hydro shop, Where in West Virginia?
But the old bottle against the curb and a car tire trick does work in a pinch.
But the old bottle against the curb and a car tire trick does work in a pinch.
happy-diver
Skindiver Just feelin it
- Messages
- 5,343
- Reaction score
- 4,795
- # of dives
- 2500 - 4999
Similar threads
