Jack Hammer
Contributor
Mine are identical to the ones posted by the OP and were sold at the time as a doubles stabilizer...
In reality they are whatever you make them work well as
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
In reality they are whatever you make them work well as
OP
Pao
Contributor
Ah OK. How do they work for doubles?
Based on what I can find:
From DiveRite's Page:
The stainless steel TransPac Stabilizing Plates firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts. They are curved to fit the spacing of double tanks, and are the only item needed to connect a TransPac harness and a wing to a set of double tanks (a hard backplate is not needed). The TransPac harness and the wing end up being sandwiched between the double tanks and the Stabilizing Plates, with the Stabilizing Plates functioning like large washers. Sold as a pair.
https://www.diverite.com/wp-content/uploads/library/Harnesses_and_BCs/BC2084 Stabilizer Plates.pdf
OP
Pao
Contributor
OP
Pao
Contributor
Pulled the trigger. 
Similar threads
