I'm not re-inventing the wheel here, but I just added new bungie straps to two pairs of jets (only one pair shown in pic) I picked up just before the Christmas. I used 1/4 inch bungie I had on hand and doubled up. No knots, too bulky and horrible waste of bungie in my opinion. Four zip ties make it unobtrusive and cheap. Nylon tubular webbing to keep both pieces of bungie roughly in the same place on my heel--may need to replace that with some inner tube if the nylon doesn't work out.
Another bungie strap picture/thread
- Thread starter fjpatrum
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Here are a couple more "in progress" shots, this time on a pair of rockets. Also, a correction: the bungie is 3/16 not 1/4 inch. We'll see if it's strong enough in the water but seems to be fine walking around the house and laying on the coffee table practicing kicks.
Similar threads
