Aeris Atmos 2

[JThompson]

I have a question and hope someone could answer it for me. For weeks now I have been trying to figure out how to download from my DC to my PC and I finally got it to work. The problem is that I have about 20 dives on this computer and when I downloaded it only 3 were there. Has anyone else had this problem?

 

[scubatoys]

How do you have the sampling rate set?? If you are sampling every 2 seconds - you might have had long enough dives that you filled up the memory. If you want to be able to wait a long time between downloads, set the sampling rate for 5 or 10 foot moves to form a new point and you will be able to hold hundreds of dives depending on your profiles.

 

[JThompson]

Yeah I do have it set for every 2 sec, thanks for the reply Ill try to change that, I guess ill just have to manualy input the info into the software

How do you have the sampling rate set?? If you are sampling every 2 seconds - you might have had long enough dives that you filled up the memory. If you want to be able to wait a long time between downloads, set the sampling rate for 5 or 10 foot moves to form a new point and you will be able to hold hundreds of dives depending on your profiles.

 

[kazinvan]

I think I have mine set to every 15 seconds, get a nice curve and still store plenty of dives.

 

[Talon]

Ditto, 15 seconds works well for me also. It stores about 14-16 dives for me that way. Which normally is plenty of room as I alwasy download my dives when I get home. Although when I do the Aquacat this summer I will probably bump it up to 30 seconds so to ensure I have plenty of room.