Hi,
2 years before all worked well, but now it doesn't and I tried a lot to find the fault without success.
What I want: Download logged dives from TUSA IQ-750 computer with the original cable (FTDI)
The Error: "unable to open computer"
What I tried:
1) check cable
2) check IQ-750
3) reinstalled FTDI diver (Mac OS ARM)
4) installed older subsurface version with libdivecomputer 0-8-0
5) tried other models (Oceanic Veo 2.0 etc)
6) tried to set a lower baud rate (did not work since libdivecomputer overrrites it) - the baud rate of 38400 seems quite high...
7) on Ubuntu same problems.
Here is the log:
Subsurface: v5.0.9, built with libdivecomputer v0.8.0-devel-Subsurface-NG (107f5b14e31f276a9b5accde2c5032ea49602403)
[222.383929] INFO: Open: name=/dev/tty.usbserial-20030001
[222.387580] INFO: Configure: baudrate=38400, databits=8, parity=0, stopbits=0, flowcontrol=0
[222.388478] INFO: Timeout: value=1000
[222.388481] INFO: DTR: value=1
[222.388724] INFO: RTS: value=0
[222.389056] INFO: Sleep: value=100
[222.494125] INFO: RTS: value=1
[222.494755] INFO: Sleep: value=100
[222.599844] INFO: Purge: direction=3
[222.600445] INFO: Write: size=1, data=84
[223.605556] INFO: Read: size=1, data=E5
[223.605570] ERROR: Failed to receive the answer. [in src/oceanic_atom2.c:683 (oceanic_atom2_packet)]
[223.605577] INFO: Sleep: value=100
[223.710655] INFO: Purge: direction=1
[223.711019] INFO: Sleep: value=1
[223.712371] INFO: Write: size=1, data=84
[224.717465] INFO: Read: size=1, data=E5
[224.717478] ERROR: Failed to receive the answer. [in src/oceanic_atom2.c:683 (oceanic_atom2_packet)]
[224.717487] INFO: Sleep: value=100
[224.822549] INFO: Purge: direction=1
[224.822924] INFO: Sleep: value=2
[224.825511] INFO: Write: size=1, data=84
[225.830622] INFO: Read: size=1, data=E5
[225.830637] ERROR: Failed to receive the answer. [in src/oceanic_atom2.c:683 (oceanic_atom2_packet)]
And I attached a screenshot from subsurface.
I hope that anyone has an Idea. Loading dives via bluetooth from Heinrichs Weikamp OSTC+ works.
Thank you,
André
2 years before all worked well, but now it doesn't and I tried a lot to find the fault without success.
What I want: Download logged dives from TUSA IQ-750 computer with the original cable (FTDI)
The Error: "unable to open computer"
What I tried:
1) check cable
2) check IQ-750
3) reinstalled FTDI diver (Mac OS ARM)
4) installed older subsurface version with libdivecomputer 0-8-0
5) tried other models (Oceanic Veo 2.0 etc)
6) tried to set a lower baud rate (did not work since libdivecomputer overrrites it) - the baud rate of 38400 seems quite high...
7) on Ubuntu same problems.
Here is the log:
Subsurface: v5.0.9, built with libdivecomputer v0.8.0-devel-Subsurface-NG (107f5b14e31f276a9b5accde2c5032ea49602403)
[222.383929] INFO: Open: name=/dev/tty.usbserial-20030001
[222.387580] INFO: Configure: baudrate=38400, databits=8, parity=0, stopbits=0, flowcontrol=0
[222.388478] INFO: Timeout: value=1000
[222.388481] INFO: DTR: value=1
[222.388724] INFO: RTS: value=0
[222.389056] INFO: Sleep: value=100
[222.494125] INFO: RTS: value=1
[222.494755] INFO: Sleep: value=100
[222.599844] INFO: Purge: direction=3
[222.600445] INFO: Write: size=1, data=84
[223.605556] INFO: Read: size=1, data=E5
[223.605570] ERROR: Failed to receive the answer. [in src/oceanic_atom2.c:683 (oceanic_atom2_packet)]
[223.605577] INFO: Sleep: value=100
[223.710655] INFO: Purge: direction=1
[223.711019] INFO: Sleep: value=1
[223.712371] INFO: Write: size=1, data=84
[224.717465] INFO: Read: size=1, data=E5
[224.717478] ERROR: Failed to receive the answer. [in src/oceanic_atom2.c:683 (oceanic_atom2_packet)]
[224.717487] INFO: Sleep: value=100
[224.822549] INFO: Purge: direction=1
[224.822924] INFO: Sleep: value=2
[224.825511] INFO: Write: size=1, data=84
[225.830622] INFO: Read: size=1, data=E5
[225.830637] ERROR: Failed to receive the answer. [in src/oceanic_atom2.c:683 (oceanic_atom2_packet)]
And I attached a screenshot from subsurface.
I hope that anyone has an Idea. Loading dives via bluetooth from Heinrichs Weikamp OSTC+ works.
Thank you,
André
