smith7052
New
smith7052. was told that the scubapro a.i.r. 1 can be serviced useing scubapro d400 service kit. anybody ever had this done are have any more info on it? thanks in advance
a.i.r first rebuild with d400 service kit
- Thread starter smith7052
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
The Air 1 uses the same poppet as the D300/D350/D400. Some of the o-rings differ a bit but are no big deal.
If you are going to DYI it, be extremely careful with the diaphragm. It is clipped on the bottom with a metal clip and there is not much room to work with inside the case to remove the clip and re-install it. If you are not extremely careful you can tear the diaphragm and they are no longer available anywhere.
If you are going to DYI it, be extremely careful with the diaphragm. It is clipped on the bottom with a metal clip and there is not much room to work with inside the case to remove the clip and re-install it. If you are not extremely careful you can tear the diaphragm and they are no longer available anywhere.
Similar threads
