7/8 hi pressure yoke valve 3442

[T. Bix]

 

[ScubaInChicago]

I converted all my DIN valves to yolk, then added a yolk to DIN conversion to fit all my DIN regs. I like living life on the edge with that additional failure point.

You could also cut/grind off the additional threads of the 300 bar DIN fitting and put your insert in. THEN put on your yolk to DIN fitting so you can hook up a DIN reg (It should be DIR compliant with all that redundancy).

 

[spectrum]

Not true of the inserts. They are diveable - but available for 200 bar as posted above.

Got me... I wasn't able to follow the link at the time and assumed it was the fill adapters. Those inserts won't begin to work on a valve with 7/8 NF threads. The 300 Bar threads are deeper and the body not contoured to hang a yoke in. Still no free lunch.
Pete

---------- Post added April 29th, 2013 at 09:41 PM ----------

I converted all my DIN valves to yolk, then added a yolk to DIN conversion to fit all my DIN regs. I like living life on the edge with that additional failure point.

You could also cut/grind off the additional threads of the 300 bar DIN fitting and put your insert in. THEN put on your yolk to DIN fitting so you can hook up a DIN reg (It should be DIR compliant with all that redundancy).

You are giving the Internet a bad name, cut it out!

 

[Tigerman]

I converted all my DIN valves to yolk, then added a yolk to DIN conversion to fit all my DIN regs. I like living life on the edge with that additional failure point.

You could also cut/grind off the additional threads of the 300 bar DIN fitting and put your insert in. THEN put on your yolk to DIN fitting so you can hook up a DIN reg (It should be DIR compliant with all that redundancy).

Question is.. did you get the USB fill whip?
http://www.scubaboard.com/forums/attachment.php?attachmentid=134122&d=1346222408