Wanted 6.9/7 inch Doubles Bands

[Bald Wookie]

Hi All,

Looking for a set of 6.9 or 7” doubles bands for a set of LP72s I have.

Looking for 8.5” spacing for a modern manifold.

Cheers!

 

[WantSomeScuba?]

Depending on the actual tanks, I have a few sets of 6.9" bands. Maybe two sets.

That said, LP72s are slightly narrower. If you don't care, lemme know and I can send you some bands. Like $100 max, plus shippin'.

 

[Jdbrun]

I would also be interested; my 72s are the pst ones

 

[Bald Wookie]

Depending on the actual tanks, I have a few sets of 6.9" bands. Maybe two sets.

That said, LP72s are slightly narrower. If you don't care, lemme know and I can send you some bands. Like $100 max, plus shippin'.

I’d be interested, for sure, especially if they have the newer manifold spacing.

Mine are 21 5/8ths circumference so 6.9” diameter PSTs.

The bands I currently have fit for an older manifold but not a newer one.

 

[Nicholas_D]

6.9 to 7.00 Inch Stainless Steel Cylinder Bands , Piranha Dive Shop -

Use these bands with 6.9" to 7.00 Inch cylinders! Our bands are made out of high quality marine grade 316-L stainless steel 1/16" Inch Thick is used and has a #4 Brushed finish that makes these bands stand out! 16 gauge thickness ensure a sturdy double set-up Bands are 2 1/2 Inches wide Fits...

www.piranhadivemfg.com

I have used these bands on my 72s with a modern manifold and it’s a perfect fit. Not the cheapest option, but it saves you looking for a narrow isolator.