1/2" overpressure relief valve

[O-ring]

Anyone know a good source for one of these? I need one for an argon reg...

Thanks!

 

[Hallmac]

if so what pressure do you want and I'll send you one.
or are you looking for a valve to go into your regulator?

Hallmac

 

[O-ring]

I need one to plug into an LP port since there will be no second stage on the reg. I know where to get 3/8" ones, but have never seen a 1/2" one and I have a first stage with 1/2" ports...

Here's a pic of one..

 

[Uncle Pug]

+ $5 for 1/2" port plug.

 

[O-ring]

Uncle Pug once bubbled...
+ $5 for 1/2" port plug.

Where?? I looked on LP already...what am I missing...??

I found this (http://s1059kxm.leisurepro.com/weba...6&cgrfnbr=976&parentCategory=974&sort=prsdesc) ... but it is $40 and doesn't say what size port it fits... Do I need this (http://s1059kxm.leisurepro.com/weba...6&cgrfnbr=976&parentCategory=974&sort=prsdesc) and then one of those?

 

[Uncle Pug]

relief valve is only $14.95
search on OMSOPV


As for the plug:
They don't have everything listed on the website so you might need to phone for the 1/2" plug... and if they don't have itthen try phone divers-supply.

 

[O-ring]

Uncle Pug once bubbled...
relief valve is only $14.95
search on OMSOPV


As for the plug:
They don't have everything listed on the website so you might need to phone for the 1/2" plug... and if they don't have itthen try phone divers-supply.

I found the OMS OPV...I am still confused about what I am looking for though. I have a first stage that has 1 - 3/8" port (used for inflator hose), 3 - 1/2" ports, and 1 hp port. I have the drysuit inflator hose in the 3/8" port and the 1/2" ports plugged, but I need a 1/2" OPV or some other MacGyver-esque setup to get the OPV on..

 

[Uncle Pug]

I see.... ok... time for using the 1/2" to 3/8" adapter then... you can either use it with the OPV or with the lp hose.

OR...

you could continue you search for a 1/2" OPV.

BTW... what brand of reg is this?

 

[O-ring]

Uncle Pug once bubbled...
I see.... ok... time for using the 1/2" to 3/8" adapter then... you can either use it with the OPV or with the lp hose.

OR...

you could continue you search for a 1/2" OPV.

BTW... what brand of reg is this?

I will have to ponder whether to put it on the hose or on the OPV though....

It is a Dacor reg...an ancient one... Hey, do you have a source for that adapter?

 

[O-ring]

http://s1059kxm.leisurepro.com/weba...play?prmenbr=946&prrfnbr=1344&merchant_rn=946