They either need to keep it in L or actually do the nominal pressure/size.
I should have the ability to
1. Name the tank size (i.e. HP 119)
2. Enter nominal pressure (i.e. 3442 psi)
3. Enter size at nominal pressure (i.e. 123 cft - as this is my actual tank size
I should have the ability to
1. Name the tank size (i.e. HP 119)
2. Enter nominal pressure (i.e. 3442 psi)
3. Enter size at nominal pressure (i.e. 123 cft - as this is my actual tank size
