service

I purchased a Mares 12S Regulator (First stage, second stage, SPG, and safe second are all Mares) while on vacation. 1. Do I need to bring it in for service every year, every other year, or some other interval to keep the warranty intact? (I know yearly reg service is industry recommended) 2...

I'd like to buy this 2nd stage in-line adjuster tool from DGX - Second Stage In-Line Adjusting Tool w/IP Gauge. I have 2 sets of regs, one which would work well with the tool, but another with the orifice nut set too far into the inlet for the tool's hex adjuster tip to reach. It is about 40mm...

I know "Scubaspares" sell piece by piece, but only to tech's i see. Anyone else selling single parts like hp valve, filter, diaphragm and similar (and kits) to private customers? Must ship to EU. Only interested in Apeks parts. Feel free to shoot me a pm if you want. Thanks

There are 4 slots along the front edge of the cover, with a little black plastic tab from the body in each. I've attached a picture of the right-side tab when the cover is not rotated, and a picture of the left-side tab (clearer) when the cover is rotated slightly clockwise, upon which it gets...

Dear experts, I started two years ago servicing my own Dacor regs as many shops refused to service them (too old; no parts). I started with the seconds as all tests were fine for the first stage. This week I did a complete overhaul of first (balanced diaphragm similar to Dacor D16) and seconds...

Hello Mares specialists, I bought a used MR 42 T and wanted to have it serviced for safety reasons. The service station in Switzerland told me that they do not service this specific model as it has a construction error and it might be damaged if they open it. They said one part is so small and...

Getting slowly into servicing my own regs. (dbl backmount and stages) And starting to look for tools. Any recommendations? And where to buy? Any particular measured basic tool i need? (Spanner tool, IP guage and a ultrasonic cleaner i a given) Also having a TX100 1 & 2 stage. Is there...

So, when I noticed small bubbles leaking from the connection between my SPG and hose, I knew it was the so-called "spool." Reading through the various threads in which someone asked about this, the solution seemed simple: unscrew the SPG, pull out the spool, and either replace the o-rings or...

Here are parts and o-ring sizes you can use instead of an AquaLung service kit (since the dealers won't sell them to you even if you're certified) This does assume that you already know how to service the Legend and just can't get parts kits. First Stage: HP Seat: Trident A244 Diaphragm...

Dear community, I'm looking for Nauticam NA-D800 service manual. So far I don't have any success in the process. Can somebody assist with the task?