Stripping paint off tank

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

BassO

Registered
Messages
16
Reaction score
4
Location
North-West Europe
I came into possession of two tanks that a previous owner's kid had 'livened up' by purposefully dripping paint all over it. The result is... not appreciated. So I'd like to see if I can strip that layer of paint. Are there any special conditions concerning paint on cylinders? Can I just use paint stripper? Can I just repaint the cylinder if I happen to clean the original paint with it? Should I skip the stripping and just add a new layer of paint (and if so, any particular type)?

Edit: I forgot to mention they are steel.
 
I came into possession of two tanks that a previous owner's kid had 'livened up' by purposefully dripping paint all over it. The result is... not appreciated. So I'd like to see if I can strip that layer of paint. Are there any special conditions concerning paint on cylinders? Can I just use paint stripper? Can I just repaint the cylinder if I happen to clean the original paint with it? Should I skip the stripping and just add a new layer of paint (and if so, any particular type)?
What kind of tank?

Citrus zip strip works ok but need to be warm outside to activate and work well. If its an AL80 just leave it bare. Repainted tanks are a huge red flag at VIP time because powder coating requires heat and heat kills the temper in aluminum. If its a spray galvanized painted faber you can use any kind of spray paint.

https://www.lowes.com/pd/CitriStrip-Stripping-Gel-1-QT/1000567963
 
Zip strip has methylene chloride in it and is pretty bad for you. Definitely only use outdoors
Follow all the precautions and wear PPE, especially goggles and gloves. If you get any on your skin you'll wish you covered up. It will burn.
 
If you have a particularly difficult coating like some epoxy paints, after you apply the stripper, wrap the tank in heavy plastic and wait overnight. It's much easier to scrape this way. It may take several applications.
 
Rub it back to the original paint that's sound and paint over that

full.jpg


That's what happens here!
 
I have a Steel Faber and was advised to use Rustoleum Aircraft Stripper by someone who has done many steel tanks and then paint them with cold galvanizing paint. I have used CitriStrip very successfully on Aluminum Tanks.
 
I just took my steels down to bare metal with that stripper. There were enough gaps in the original zinc coating that I did a Rustoleum Cold Zinc repaint. But the zinc is very powdery and comes right off. So I spot repainted the gaps and then did a semi gloss spray Rustoleum poly overcoat
Came out great! And it's been durable.
Resized_20200730_074057.jpeg
 

Back
Top Bottom