Air consumption?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

The average here is 14.7 psi, or 1 ATM, or 1 BAR with slight variations for barrometric pressure caused by weather, the 1200 foot above sea level altitude I am at, the air handeling system kicking on, etc......

Am I that slow at typing? Look at your time and then mine for posting. Whew (again)! To all reading, I promise I did not copy muddiver's answer. I knew it on my own, really! :)
 
OK.
Now I'm running really, really fast and hard.
What psi am I consuming now?

the K
 
Well, it's still 14.7 psi, but . . .

. . . the cubic foot per minute VOLUME has changed.

the K
 
You guys still at it over the difference and best use of SAC vs RMV?

Reread the original question.
How much air would you use on a dive at say 30' for 40 mins?
To which I said,
I would use about 60% of the air in my HP100 tank. ;)

And I stick by it.;)
 
Well, it's still 14.7 psi, but . . .

. . . the cubic foot per minute VOLUME has changed.

the K

Kraken I agree. You are breathing at 14.7 psi but the volume of gas (air) has changed to suit your body's demands. I think I know where your going with this...

SAC= (((psifinal-psiinitial)/time)/((depth in feet+33)/33))​
=(((14.7-14.7)/(any time [doesn't matter because the numerator is zero])/((0+33/33))=0 psi/minute​
then using the RMV SAC*k, we could use a k of any positive number and our RMV would still be zero, even though we have changed the volume of gas per time requirements. Am I warm so far?

The problem is that when breathing from a compressed gas source, when we exhale, our expired breath is not going back to the tank where our gauge measurements are from. So there will be a difference in the delta psi.

Or did I put the cart before the horse?
 
It really doesn't matter to me . . . I just like to argue sometimes! :D
 
Well damn, the last time I went diving I was breathing about 50 psi per minute. Since I'm currently at 14.7 psi, that means that I have 17.64 seconds before I run out of air!
 
SAC and RMV are not related, at least not by the simple formula you quote in the NOAA manual. (Just because you read it in a book doesn't mean it's true.) You don't need a text book for this, it's simple math and scientific deduction.

Since SAC may or may not incorparate gas consumption from non-respiratory activities, a proper formula relating SAC and RMV would have be something along the lines of:

SAC = (RMV + X )* K

Where X accounts for the gas consumption from non-respiratory activities (e.g., drysuit inflation)

I rather enjoy this discourse, don't think it's pointless bickering. If I have offended anyone with "attitude," I apologize.
 
Well, it's still 14.7 psi, but . . .

. . . the cubic foot per minute VOLUME has changed.

the K

But what is my pressure at 3300'?

Is 12.7 psi close? I don't remember the calculations, just remember to add depth to the table for altitude diving.
 

Back
Top Bottom