Closed Wanted: Scubapro G250V

[Mobulai]

Instead of making an identical thread I thought I’d leave a comment on this one instead.

I’m also looking to buy a G250V. Please let me know. Thanks!

I can help with that, where are you based (I’ll have to ship it from the EU)?
(Ok I see you’re in FL, so US ofA; let’s try and make this happen before tariff deadlines kick in — for your benefit)

(Might be better if we switch to DM)
Edit: for some reason I can’t DM you — you seem to have crossed the 5 post limit so… do you have DMs allowed in your settings ?

 

[Kahuna.]

What happened to the purge button on the right lower V?
And that hot pink cover

It's partially disassembled. I am going to try to scan it and get some vinyl colored overlays cut, a different color for each member of the family!

 

[Mobulai]

It's partially disassembled. I am going to try to scan it and get some vinyl colored overlays cut, a different color for each member of the family!

Oooh that’s a great idea, I wanna get in on that action — would appreciate it a lot if you share the scans on here

 

[Kahuna.]

Oooh that’s a great idea, I wanna get in on that action — would appreciate it a lot if you share the scans on here

Will do once I get to it. Check this thread for some inspiration!

Thread 'The Red, the Tec & the Blue (Scubapro G250V customization).'

Feb 8, 2021

Hi...

Disclaimer before I post the picture.

This is for sharing purposes only & I wouldn't suggest anyone try this at home, as it might caused permanent cosmetic damages/dissatisfaction to your unit, if it's not done carefully & I definitely don't wanna be blamed for it.

For the hard-core G250V fans, you might not wanna continue reading, as it might trigger your diy button to try, doing it.

Warning: It may look easy to do but it's not as easy as you think.

Enough of the drama. Here we go...

• EdEng
• Replies: 42
• Forum: Regulators

 

[Mobulai]

Will do once I get to it. Check this thread for some inspiration!

Thread 'The Red, the Tec & the Blue (Scubapro G250V customization).'

Feb 8, 2021

Hi...

Disclaimer before I post the picture.

This is for sharing purposes only & I wouldn't suggest anyone try this at home, as it might caused permanent cosmetic damages/dissatisfaction to your unit, if it's not done carefully & I definitely don't wanna be blamed for it.

For the hard-core G250V fans, you might not wanna continue reading, as it might trigger your diy button to try, doing it.

Warning: It may look easy to do but it's not as easy as you think.

Enough of the drama. Here we go...

• EdEng
• Replies: 42
• Forum: Regulators

It’s like you read my mind — I’m actually planning on replicating one of Ed‘s designs, the Yin/Yang BA with the perorated cover, I found a donor 109 that I plan to butcher up under a dremel

 

[Kahuna.]

Please post pics once you are done!

 

[Mobulai]

Please post pics once you are done!

I’ll try to document the whole project — just as I find the capacity to start on it, too many gutted parts/projects on the workbench

 

[Kahuna.]

I’ll try to document the whole project — just as I find the capacity to start on it, too many gutted parts/projects on the workbench

I feel you. Every one of those regs on the bench need servicing for a start!

 

[Entertainter]

I can help with that, where are you based (I’ll have to ship it from the EU)?
(Ok I see you’re in FL, so US ofA; let’s try and make this happen before tariff deadlines kick in — for your benefit)

(Might be better if we switch to DM)
Edit: for some reason I can’t DM you — you seem to have crossed the 5 post limit so… do you have DMs allowed in your settings ?

Hmm I just went to site support to see what the issue was. Can you trying DMing me again?

 

[Rayk]

Did someone said red 250?