here a small clip of my test ride, but you can tell the noise levelThanks for the info. What sort of runtime are you getting from use on speed 6? Curious about the noise level also - I can't seem to find my YT video examples
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
here a small clip of my test ride, but you can tell the noise levelThanks for the info. What sort of runtime are you getting from use on speed 6? Curious about the noise level also - I can't seem to find my YT video examples
BT max continuous thrust is about 45 lb. The short-lived boost mode (~7 mins?) is 57 lb. Max continuous for the Go is 58 lb.I was under the impression the Black tip could run at the same max speed as the Go, but only for short bursts due to thermal throttling?
Is it really that silent???Here is a link to a short video of the dive. The last clip, when we are heading west, the Go had reverted to 50% power and the two genesis had throttled down to allow me to keep up.
Dropbox
www.dropbox.com
Is it really that silent???
Don't know about the noise, it sounds different whether the camera is mounted on the front handle or back near motor.Is it really that silent???
A rough estimate, we do weekends 3-4 dives of about 4-4.5 hours / 6-7.5 km and left with ~3 battery indicator leds (out of 9).Thanks for the info. What sort of runtime are you getting from use on speed 6? Curious about the noise level also - I can't seem to find my YT video examples
Wow, even when on 50% power, that still looks like a really decent speed, though I can't really tell if you guys are going with a current, or slack water etc.Here is a link to a short video of the dive. The last clip, when we are heading west, the Go had reverted to 50% power and the two genesis had throttled down to allow me to keep up.
Dropbox
www.dropbox.com
So on that day, it was dead calm out in the ocean with no current whatsoever. What you are seeing is the actual speed of the DPV at 50%.Wow, even when on 50% power, that still looks like a really decent speed, though I can't really tell if you guys are going with a current, or slack water etc.
On the Go, the camera mount is on the operating handles, smack in the middle, so it is above and and near the leading edge of theDon't know about the noise, it sounds different whether the camera is mounted on the front handle or back near motor.
But regardless of noise, thing is a dolphin magnet...
Dropbox
www.dropbox.com