Shearwater Cloud Example Dive Log File

[atestani]

I have recently purchased a Shearwater Peregrine TX and have installed the Shearwater Cloud software. I won't be diving with the new computer for a few weeks and am looking for an example *.db file to load into the software to learn it. If someone would post or PM me a file, that would be great!

Thanks

(PS I have searched this board for an example file but couldn't find one. If there is one available, please let me know where.)

 

[inquis]

The factory test dive can be downloaded via Bluetooth within the Shearwater app.

 

[atestani]

The factory test dive can be downloaded via Bluetooth within the Shearwater app.

Thanks. I don't have the computer yet so an example file would be useful.

 

[icyz_]

Second this, would be helpful to have the file shared here.

 

[Capt Jim Wyatt]

The cloud logging software is very buggy. I have dives listed from 1970 & some depths recorded are way off.

 

[sea_ledford]

The cloud logging software is very buggy. I have dives listed from 1970 & some depths recorded are way off.

I had a few 1970 dives as well. They were from my old Predator that would lose its date and time if I let the battery die between dive seasons and didn't remember to reset it before diving. Used to be a pain to change the date, but I think it's pretty easy in current versions.

I've been pretty critical of SW cloud in the past, but it seems to be getting better and less buggy for me.

 

[atestani]

The factory test dive can be downloaded via Bluetooth within the Shearwater app.

I have the Peregrine TX (PTX) computer now and see the "factory dive" on it. I can connect to the Cloud App on my computer, do a sync, and the PTX says data was sent. However, nothing is in the Cloud app dive list. I've restart both the PTX and app, done a re-sync, etc. and get zero dives showing. What am I missing?

 

[passeparici]

Used to be a pain to change the date, but I think it's pretty easy in current versions.

Very easy now : you click on the blue parts on the top right where there are the date and the time and then you can change what you want

 

[inquis]

Very easy now : you click on the blue parts on the top right

Or even easier: check the box in the settings that will set the time every time you connect.

 

[atestani]

I have the Peregrine TX (PTX) computer now and see the "factory dive" on it. I can connect to the Cloud App on my computer, do a sync, and the PTX says data was sent. However, nothing is in the Cloud app dive list. I've restart both the PTX and app, done a re-sync, etc. and get zero dives showing. What am I missing?

Can anyone tell me what is going on here? Would still very much like to get an example Shearwater *.db file to get the dive log all working before I dive with the new computer. Anyone?