zip seals DUI, anyone glue new gloves on the inside instead of outside?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

cjmiller

Registered
Messages
26
Reaction score
2
Location
02631
Have a set of wrist seals that I've pulled the old latex seals off and looking to make a set of dry gloves. Looking at Atlas 49 "vinylove"; if you put the zip on the outside of the glove, it fits quite well, and my 1-liter Yeti will stretch the glove and seal to the right diameter. I can trim up the extra length of glove when done, or just cram it into the sleeve.

Has anyone done this (attach to the inside, not the outside of a reused zip seal). Would have to use aquaseal etc. as contact cement wouldn't work; have to reposition a bit as the glove and zip seal base stretch together.
 

Attachments

  • PXL_20220316_144854331.MP.jpg
    PXL_20220316_144854331.MP.jpg
    86.2 KB · Views: 22
OP
C

cjmiller

Registered
Messages
26
Reaction score
2
Location
02631
I ended up not doing this, just glued some generic latex wrist seals in place. I bought a set of used compressed neoprene dui gloves so the wrist seals are the spares.
 
https://www.shearwater.com/products/perdix-ai/

Top Bottom