Unbelievable a true do it yourself guy. Nice tools.
What do you all think?
- Thread starter BigRed96
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 7,302
- Reaction score
- 6,326
- # of dives
- 2500 - 4999
Thanks, that's very nice of you, I can't afford to buy anything much, still use Mk10 109s
I couldn't even get the right paper to draw up this plan to build my chestmount rebreather
I couldn't even get the right paper to draw up this plan to build my chestmount rebreather
OP
BigRed96
Contributor
Good eye
FIFY
- Messages
- 17,656
- Reaction score
- 9,908
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Fixed It For You
"Fixed it for you"
- Messages
- 17,656
- Reaction score
- 9,908
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Fixed It For You
Thanks Rob.
Have you seen this? Any advice or ideas? Any insight would be greatly appreciated.
My new G250Vs and ramblings
- Messages
- 7,302
- Reaction score
- 6,326
- # of dives
- 2500 - 4999
FIFM
- Messages
- 7,302
- Reaction score
- 6,326
- # of dives
- 2500 - 4999
Well now that I remember the bent tapered end knitting needle is for the rubber vinyl Fenzy, opv
The two top two flat stainless keys are to adjust the Draeger Duomat I learnt on in 1976
The screwdriver is filed thin for 2nd stage orifices
Squiggly stainless rod is for Schraeder valves German theme happening here
and the pin tools for a few different regs and the valve nut and something else thing
and the wet and dry hone for Mk 2s, you've seen that hone in another photo years ago couv.
I shaped beautifully from round stock the first pin tool I made, on the left, there's even a divit drilled in it
to allow for the plastic lump in the cap at the top of the Air 1. Lost my artistry time. Now they stay round.
The bottom thing is a pushbike handlebar triathlon rest, (who me, ha no way)
just something with flat faces to support more roll pins
Very good, thanks, ha ha ha ha ha!
The two top two flat stainless keys are to adjust the Draeger Duomat I learnt on in 1976
The screwdriver is filed thin for 2nd stage orifices
Squiggly stainless rod is for Schraeder valves German theme happening here
and the pin tools for a few different regs and the valve nut and something else thing
and the wet and dry hone for Mk 2s, you've seen that hone in another photo years ago couv.
I shaped beautifully from round stock the first pin tool I made, on the left, there's even a divit drilled in it
to allow for the plastic lump in the cap at the top of the Air 1. Lost my artistry time. Now they stay round.
The bottom thing is a pushbike handlebar triathlon rest, (who me, ha no way)
just something with flat faces to support more roll pins
Very good, thanks, ha ha ha ha ha!
Similar threads
