What do I do.....?

[danemeyer20]

I let my friend borrow my backup set of regs. He used his own inflator hose because he had an air2. Not paying attention he took out the inflator hose before he went to clean the regs and got water inside the open LP port where the inflator hose used to be. I have never come across this problem and need to know what exactly i should do to ensure i dont have any problems. Cleaned with fresh hose water by the way

 

[Rhone Man]

Break it down, let it dry, reassemble.

You should be fine. There is nothing in there that will be damaged by a little water.

 

[Dive Right In Scuba]

Main thing is leave it open to dry or put a small fan on it....this will prevent corrosion

 

[halocline]

Take out the SPG, plug the HP port, take out all the LP port plugs, put it on a tank, and blow some scuba air through it. Then unplug the HP ports, blow scuba air through them. That should dry it out.

 

[Walter]

Take it in for servicing and give your friend the bill.

 

[danemeyer20]

Take out the SPG, plug the HP port, take out all the LP port plugs, put it on a tank, and blow some scuba air through it. Then unplug the HP ports, blow scuba air through them. That should dry it out.

i like that idea right there, dont know why i didnt think of that. after i will hang it