Bigd2722
Contributor
Any one know where I can find a tank valve tester for high pressure? In other words, 5/8"?
thanx
thanx
valve tester
- Thread starter Bigd2722
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
kwinter
Contributor
I don't understand the question. What kind of valve tester? And what does 5/8 have to do with pressure? Are you referring to the 5/8 BSP thread we all know as DIN?
tech_diver
Contributor
See if this is what you are looking for...
This allows you to pressurize a valve underwater and check for leaks. There is a 5/8 adapter available.
XS Scuba Service Equipment
near the bottom of the page...
This allows you to pressurize a valve underwater and check for leaks. There is a 5/8 adapter available.
XS Scuba Service Equipment
near the bottom of the page...
The adapter is exactly what I was looking for, thanx
---------- Post added August 4th, 2014 at 11:04 AM ----------
For working on tank valves, there is a fitting called a tester. It allows you to pressurize a valve without having to drain the tank. I have the tester for the newer hp valves with 3/4" threads, but I have some 5/8" tanks and valves also. Tech Diver nailed it.
---------- Post added August 4th, 2014 at 11:04 AM ----------
For working on tank valves, there is a fitting called a tester. It allows you to pressurize a valve without having to drain the tank. I have the tester for the newer hp valves with 3/4" threads, but I have some 5/8" tanks and valves also. Tech Diver nailed it.
Similar threads
