Valve Plug

[gatoremt]

I have a 2 old Scuba Pro tank valve. Both were bought used and are missing the plug on the side of the valve. Does anyone know where I might be able to find a plug for them as the valves have not been made for years. I have uploaded to pictures of the valve.

 

[grf88]

Even if you solve the plug problem it looks like these valves do not have a burst disc which might make it difficult to get them filled.

Edit: On second take maybe the burst disc is hidden in the photo.

 

[Bob DBF]

You might check with an EU vendor as they still make a very similar ScubaPro valve now for the European market. Since your valve was made in Europe, and I believe it was metric except for the tank fitting, you might be able to source one there.


Good luck

Bob

 

[gatoremt]

Thanks Bob any idea of an EU vendor?

 

[gatoremt]

Have not had any luck. Might just by new valve. Think that will be easier lol

 

[Caveeagle]

Might want to double check to confirm tank thread size. The euro tanks are M25 (or something like that). Very close the 3/4 but will not work.

 

[gatoremt]

Thanks will do.

 

[Nick Ruberg]

That looks like a modular valve such as used for diving twins. You can connect a manifold to it or get a plug to close it off. Just be sure to check whether it 8s a right hand or left hand thread.

DGX Modular Valve Port Plug, Notched (Reverse Threads)