the million different lights available

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Don't be so sure:

http://www.airspeedpress.com/gallery.html
(it's down towards the bottom)

A warning to all you MagLite hackers, the O-rings in these are a tad on the small size, and there's no telling how old the ones that come with the light are. It's a good idea to get some fresh ones, and replace them on a regular basis.




Padipro once bubbled...
HID would be nice but again it's very expensive and the parts are to big to fit into a Mag-Lite.Scott
 
You have to add some extra O-rings to get the Mag-lite to seal with the MR-16 bulb and the original O-rings aren't really even used except to keep the lens snug against the retaining ring. I do leave the end cap O-ring installed but either use JB Weld to permentely seal the end cap or at the least LOTS of teflon thread tape.

Take a look at the my post on page one. The link will take you to some pics of the Mag-Lite head O-ring placement.

Scott


oxyhacker once bubbled...
Don't be so sure:

http://www.airspeedpress.com/gallery.html
(it's down towards the bottom)

A warning to all you MagLite hackers, the O-rings in these are a tad on the small size, and there's no telling how old the ones that come with the light are. It's a good idea to get some fresh ones, and replace them on a regular basis.




 

Back
Top Bottom