Surprise! My Scout flooded

[BlueDolphin]

My Scout flooded today. The bezel wore through to the lens and water leaked in through the bezel.

Where can I get a replacement head/bezel/bulb? This I believe is pre 2003 model.

I see a bezel and bulb at Techdivinglimited.com.... anyone know if these are compatible with the Scout? They look identical to the Scout parts. But the sight does not have much in the way of a description.

 

[JeffG]

My Scout flooded today. The bezel wore through to the lens and water leaked in through the bezel.

Where can I get a replacement head/bezel/bulb? This I believe is pre 2003 model.

I see a bezel and bulb at Techdivinglimited.com.... anyone know if these are compatible with the Scout? They look identical to the Scout parts. But the sight does not have much in the way of a description.

Have you tried Halcyon?

 

[Vie]

You can also try UK (SL4) parts—should be pretty easy to find in CA:

http://www.uwkinetics.com/CategoryDisplay_cgmenbr=91&cgrfnbr=844.htm

Sunlight SL4 Lamp/Reflector Part #: 80501
SL4/Sl6 Bezel with Rubber Sheath Part #: 22804

 

[JeffG]

You can also try UK (SL4) parts—should be pretty easy to find in CA:

http://www.uwkinetics.com/CategoryDisplay_cgmenbr=91&cgrfnbr=844.htm

Sunlight SL4 Lamp/Reflector Part #: 80501
SL4/Sl6 Bezel with Rubber Sheath Part #: 22804

The light is the same, the Bezel fits...but, the bulb sits differently between the two bezels.

With the SL4 bezel the light turns on maybe 1 turn after the threads have been engaged. (and the bottom part of the bezel just got over the oring)

So my guess it would work, but the whole thing isn't held on by very many threads when the light is off. So my guess would be it would be very easy to flood the light when backing off the bezel.

 

[OE2X]

Must be something in the water today. I flooded my HID's battery tonight.